Modified Voodoo Lab Overdrive DIY Project PCB

Titan - Modified Voodoo Lab® Overdrive Guitar Pedal PCB



Not sure where to start? Check our Resources section for more information on building your own guitar pedals.

Back to top

Project overview

Aion Titan - Modified Voodoo Lab® Overdrive PCBThis PCB allows you to build a modified Voodoo Lab® Overdrive. Modifications include the addition of a tone control, different clipping diodes, and a couple of other part value changes. This puts it in line with a few other commercially-available modified clones out there.

This project also includes a voltage doubler so you can run it at 18 volts with a standard 9V supply. This has the effect of being tighter with more clarity and most people prefer it with the higher voltage. It also includes a switch to change the response of the tone control as well as a clipping diode switch.